Tris bed with drawer

The Tris bed with drawer in Scandinavian style is a high quality bed.
It is made of excellent quality pine squares. It is a perfect choice not only for sleeping but also for playing safely.
The wood is finely sanded, the edges polished and the wood untreated.

Barriers
The barriers are high and strong – 31 cm, the length of the front barrier can be chosen between: 1/2, 2/3, 3/4, The front barrier is removable.
The entrance is located outside, looking forward. If the entrance must be in the middle, choose the length of the front ramp 2/3 and choose the side of the entrance: middle.

Height:
The height of the upper ramp – 68 cm.
The bevel of the roof starts at 105 cm.
The total height (roof on one side) depends on the width of the chosen bed:
– at the height of 80 cm – the maximum height – 148 cm
– at the height of 90 cm – the maximum height is 153 cm.
– at the width of 100 cm – the maximum height – – 156 cm
– at the width of 120 cm – the maximum height – 163 cm

On request, the maximum height can be lowered – just indicate in the notes of your order the maximum height of the bed.
Selected bed size = mattress size
For an order of 160×80, you must purchase a mattress of the same dimensions.
External dimensions of the bed + 8 cm in width and + 8 cm in length

standard drawer
The height of the drawer fronts is 25 cm. The drawers are very spacious. You can choose one large or two small drawers. Drawer handles can be: milled or corded.

Sleep function drawer
For an additional cost, the drawer can be equipped with a frame for another mattress – for sleeping. Choosing a mattress for additional sleeping, you need to take into account that the length of the mattress should be 10 cm less. For example, if you buy a bed in the size of 160×80 in a drawer with a sleeping function, the mattress will have to be in the size of 150×70.
The sleeping function mattress cannot exceed a thickness of 10 cm.
Note: exception for size 140/200 – in a drawer with a sleeping function, the mattress should be 120/190.

Mattress selection:
The bed does not have a mattress
The mattress is recessed into the frame by about 3 cm.
We recommend a maximum mattress thickness of 15 cm. If we consider a 10 cm thick mattress, the baby will sleep at a height of 43 cm. The bed is supplied with a set of screws and a mattress frame. It is made of a 6 cm wide pine board – the distance between the boards is 6-8 cm depending on the size. The maximum load is 100 kg.

Color :
– natural wood
– transparent lacquer
– White
– Gray
– natural wood + white – please specify in the notes of your order which elements must be natural and which must be white. The beds are decorated with water paintings and have a child safety certificate.
Chimney – If you want a chimney on your roof, select this additional choice.

Installation instructions are emailed after payment is approved. Available in client panel after login.